Tuesday, May 10, 2016

YARD Stick One

YARD Stick One is a sub-1 GHz wireless transceiver controlled directly from your computer. It uses the same radio circuit as the popular IM-Me. The radio functions that are possible by customizing IM-Me firmware are now at your fingertips when you attach YARD Stick One to a computer via USB.

YARD Stick One (Yet Another Radio Dongle) comes with RfCat firmware installed, courtesy of atlas. RfCat allows you to control the wireless transceiver from an interactive Python shell or your own program running on your computer. YARD Stick One also has CC Bootloader installed, so you can upgrade RFCat or install your own firmware without any additional programming hardware.



Includes:

One ANT500 telescopic antenna – a 50 ohm antenna suitable for radio frequencies between 75 MHz and 1000 MHz.
3d printed case specific to the YARD Stick One.


YARD Stick One has several features not previously seen in CC1111 dongles:

*half-duplex transmit and receive

*official operating frequencies: 300-348 MHz, 391-464 MHz, and 782-928 MHz

*unofficial operating frequencies: 281-361 MHz, 378-481 MHz, and 749-962 MHz

*modulations: ASK, OOK, GFSK, 2-FSK, 4-FSK, MSK

*data rates up to 500 kbps

*Full-Speed USB 2.0

*SMA female antenna connector (50 ohms)

*software-controlled antenna port power (max 50 mA at 3.3 V)

*low pass filter for elimination of harmonics when operating in the 800 and 900 MHz bands

*GoodFET-compatible expansion and programming header

*GIMME-compatible programming test points
open source

MORE INFO

No comments:

Post a Comment

Thank you for adding your input to the discussion.